Land-Based-Products
Breather valve
Pressure and vacuum relief breather valve is designed to protect low pressure storage tanks from excessive Pressure (or vacuum) created by thermal expansion (and contraction) and product movement into(out of) the tank and at the same time minizing costly product evaporation/loss.
Excesses in pressure or vacuum may also cause permanent deformation to the tank or unbalance a vapor recovery system.
The pressure and vacuum relief breather valve is installed on the storage tank roof. The valve may be mounted in onjunction with a KSFH or KSFI flame arrester to provide maximum protection against excessive pressure and vacuum while minizing accidental ignition of flammable product vapor from external sources.
Excesses in pressure or vacuum may also cause permanent deformation to the tank or unbalance a vapor recovery system.
The pressure and vacuum relief breather valve is installed on the storage tank roof. The valve may be mounted in onjunction with a KSFH or KSFI flame arrester to provide maximum protection against excessive pressure and vacuum while minizing accidental ignition of flammable product vapor from external sources.
Benefits
• Meet USCG, IMO MSC/Circ,677 & EN ISO 16852 requirements
• Designed for Explosion & Deflagration proof
• Maximum Capacity & Minimum Pressure drop
• Capability of Bi-directional flow & flame arresting
• Quick & Easy removable element
• Very easy cleaning & maintenance
• Available vertical & horizontal installation
• No need forced push out pipe-lines for removing element
• High quality corrosion & chemical resistance
• Meet USCG, IMO MSC/Circ,677 & EN ISO 16852 requirements
• Designed for Explosion & Deflagration proof
• Maximum Capacity & Minimum Pressure drop
• Capability of Bi-directional flow & flame arresting
• Quick & Easy removable element
• Very easy cleaning & maintenance
• Available vertical & horizontal installation
• No need forced push out pipe-lines for removing element
• High quality corrosion & chemical resistance
INTRODUCTION
The model KSFH inline flame arrester is designed, manufactured and tested according to API 2000. British Standard Specification Code BS 7244, EN ISO 16852 and FM(Factory Mutual) approved.
The unit are passive devices with no moving parts.
They prevent the propagation of flame from the exposed side of the unit to the protected side by the use of a 316L stainless steel crimped metal ribbon type flame cell element.
This construction produces a matrix of uniform opening that are carefully constructed to quench the flame by absorbing the heat.
This provides an extinguishing barrier to the ignited vapor mixture.
The KSFH flame arresters have specifically designed heat transfer characteristics for slow moving flames and low medium pressure fronts (low to medium deflagration).
Inline flame arresters can be installed either vertically or horizontally within a designated distance from the potential ignition extras.
The standard flame cell is suitable for NEC group D or IEA IIA gases. Cells for other gas groups are available as additional extras.
The flame arresters are available with either aluminum, nodular iron, cast steel, 304SSss, 316SS and 316LSS housings, Iron and steel housings are supplied epoxy coated.
The unit are passive devices with no moving parts.
They prevent the propagation of flame from the exposed side of the unit to the protected side by the use of a 316L stainless steel crimped metal ribbon type flame cell element.
This construction produces a matrix of uniform opening that are carefully constructed to quench the flame by absorbing the heat.
This provides an extinguishing barrier to the ignited vapor mixture.
The KSFH flame arresters have specifically designed heat transfer characteristics for slow moving flames and low medium pressure fronts (low to medium deflagration).
Inline flame arresters can be installed either vertically or horizontally within a designated distance from the potential ignition extras.
The standard flame cell is suitable for NEC group D or IEA IIA gases. Cells for other gas groups are available as additional extras.
The flame arresters are available with either aluminum, nodular iron, cast steel, 304SSss, 316SS and 316LSS housings, Iron and steel housings are supplied epoxy coated.
| DEFLAGRATION & EXPLOSION PROOF TYPE | |
|---|---|
| MATERIAL | AL / C.S / S.S |
| SIZE | 1 |
| GAS GROUP | IIA, IIB |