Land-Based-Products
Flame Arrester
Flame Arrester is used for preventing of flame transmission any more when an explosion is occurred inside of the piping which is full of explosive mixed gas.
It's known as inflammability prevention equipment, reverse flame prevention equipment from old day.
It's limits so as not to be occurred extension of damage when explosion is occurred in chemical equipment or the progress of work.
In addition to, if safety equipment of this kind is installed you can prevent from big calamities occasionally.
Function of Flame Arrester is to stop of flame when it's extraordinary.
It need practically not to disturb flowage of gas of piping inside in common operation condition.
There is several methods of principle to prevent extension of flame method by stick of water, interception of a pipe conduit by detection of flame or scattering of inactivity material but there's some practical problems as easiness of usage, reliance, a response, economical efficiency. Also, there are water seals, packed beds, velocity-type arresting device.
It's known as inflammability prevention equipment, reverse flame prevention equipment from old day.
It's limits so as not to be occurred extension of damage when explosion is occurred in chemical equipment or the progress of work.
In addition to, if safety equipment of this kind is installed you can prevent from big calamities occasionally.
Function of Flame Arrester is to stop of flame when it's extraordinary.
It need practically not to disturb flowage of gas of piping inside in common operation condition.
There is several methods of principle to prevent extension of flame method by stick of water, interception of a pipe conduit by detection of flame or scattering of inactivity material but there's some practical problems as easiness of usage, reliance, a response, economical efficiency. Also, there are water seals, packed beds, velocity-type arresting device.
Benefits
• Meet USCG, IMO MSC/Circ,677 & EN ISO 16852 requirements
• Designed for Detonation & Deflagration proof
• Maximum Capacity & Minimum Pressure drop
• Capability of of absorption of high shock pressure
• Quick & Easy removable element
• Very easy cleaning & maintenance
• Available vertical & horizontal installation
• High quality corrosion & chemical resistance
• Meet USCG, IMO MSC/Circ,677 & EN ISO 16852 requirements
• Designed for Detonation & Deflagration proof
• Maximum Capacity & Minimum Pressure drop
• Capability of of absorption of high shock pressure
• Quick & Easy removable element
• Very easy cleaning & maintenance
• Available vertical & horizontal installation
• High quality corrosion & chemical resistance
INTRODUCTION
The model KSFD inline detonation flame arrester is designed, manufactured and tested according to British Standard Specification Code BS 7244, EN ISO 16852, USCG and IMO MSC/Circ,677.
The KSFD detonation flame arresters provide protection against flame propagation in piping systems that are manifolded or have long runs.
The arresters are designed to stop an ignited flammable vapor mixture travelling at subsonic or supersonic vapor velocities.
They are also designed to protect against continuous burning against the 316LSS flame cell for a specific period.
The atandard flame cell is suitable for NEC group D or IEC IIA gases. Cells for other gas groups are available as additional extras.
The flame arresters are available with either carbon steel (epoxy coated), 304SS, or 316SS housing with 316LSS flame cells.
Sizes range from 25mm to 300mm.
Standard flanges are ANSI 150lb and other connections are available upon request.
The KSFD detonation flame arresters provide protection against flame propagation in piping systems that are manifolded or have long runs.
The arresters are designed to stop an ignited flammable vapor mixture travelling at subsonic or supersonic vapor velocities.
They are also designed to protect against continuous burning against the 316LSS flame cell for a specific period.
The atandard flame cell is suitable for NEC group D or IEC IIA gases. Cells for other gas groups are available as additional extras.
The flame arresters are available with either carbon steel (epoxy coated), 304SS, or 316SS housing with 316LSS flame cells.
Sizes range from 25mm to 300mm.
Standard flanges are ANSI 150lb and other connections are available upon request.
| TYPE FLAME ARRESTER | |
|---|---|
| Meet USCG, IMO MSC/Circ,677 & EN ISO 16852 requirements Designed for Detonation & Deflagration proof Maximum Capacity & Minimum Pressure drop Capability of of absorption of high shock pressure Quick & Easy removable element Very easy cleaning & maintenance Available vertical & horizontal installation High quality corrosion & chemical resistance |